G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Noobuel Posted on Sunday, September 28, 2014 - 11:07 pm:        I'm in the process of replacing the rotor hardware on my front wheel (unfortunately not the EBR as it's still out of stick), and have a question. I'm either blind, or the service manual is missing a couple points regarding R/R of the rotor itself. I found a thread that included the EBR hardware instructions that states that the step on the rotor surface faces outward (question #1 answered). However, I can't seem to find documentation as to where the dot on the rotor is supposed to be aligned. I found one reference on another board stating it was originally supposed to be aligned with the valve stem. Can you all confirm alignment spec for the rotor dot? (Message edited by noobuel on September 29, 2014)   Kruizen Posted on Monday, September 29, 2014 - 06:59 am:        Rumor is it should be lined up with the valve stem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: