G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Hatch_daddy Posted on Saturday, September 13, 2014 - 08:45 pm:        Just wanted to say thanks to everyone for all the great posts and abundance of information on the charging system issues. I was having system voltage errors on my display and then it would shut off, later resuming a few miles down the road at 14v. Just finished changing my VR and did the EBR rotor at the same time. Ordered the EBR ECM too but didn't install it yet, wanted to make sure my charging issue was solved first. After a short test ride, no errors and maintained 13.5-.14.5v. So hope all is well for now. Thanks again for all the trial and error words of wisdom.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: