G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Stevenfrye Posted on Friday, September 05, 2014 - 10:00 am:        So buddy ao mine at work got a buell blast i noticed the drive belt he was using is half to thin of the sproket anyone got a part number or am just seeing things thinking its wrong compared to the width of the one on my 1125   D_adams Posted on Friday, September 05, 2014 - 10:04 am:        Pretty sure they were 1/2 the width of the sprocket, or at least much thinner in width than an 1125 belt is.   Froggy Posted on Friday, September 05, 2014 - 10:46 am:        Yes that is normal, that is how they are. The rear sprocket is significantly wider than the belt, but the front one is the right width. You can see the wear on the outer half of the sprocket from the belt - http://assets.suredone.com/1533/media-photos/br238 6-2008-buell-blast-500-p3-oem-rear-wheel-sprocket- belt-drive-4.jpg The rest of the sprocket is basically a giant spacer.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: