| Author | Message | ||
     Mitchg |
Searched and still searching, but finding nothing. Need throttle cable, clutch and front brake hose lengths for the following: 1125CR WITH HIGH BARS Throttle pull cable...._________ Throttle push cable.._________ Clutch hose.............._________ Front brake hose......_________ 1125R or 1125CR WITH STOCK BARS Throttle pull cable...._________ Throttle push cable.._________ Clutch hose.............._________ Front brake hose......_________ Any "confirmed"lengths you can post would be of great help otherwise I will need to purchase most of the cables and hoses listed above just to measure them so I can order custom longer hoses. The throttle cable lengths are the most critical and can be measured from end to end of the "INNER CABLE". I appreciate any help you can give me on this. Mitch (Message edited by MitchG on July 26, 2014) | ||
| Fresnobuell |
I don't have the lengths but I will say I think the throttle cable is too short. Just like my XB, when I approach full lock to the right, the throttle hangs up and will not spring to a closed throttle position. I live with it because you don't find yourself making many manuvers at full lock to the right...but perhaps if there was an extra inch or two of cable, it wouldn't bind. | ||
| Mitchg |
Totally agree! I'm thinking on running the CR high bar cable on the R and having a custom cable longer than the CR high bar cable made for another R that is using Convertibars. |
