G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tygun Posted on Monday, July 21, 2014 - 06:48 am:        Hey. I have change from high handlebar to clubman. And dont change any cabels In the begining the throttle dont go back by it Self. I install the ecm with do manuel turn the throttle back after full speed 3 times. Now i found out it was the throttle cable that not was tigth enough thats why it dont turn back. I have fix it now.. Do i need to make the reset again for the ecm? And leave it for 10 min. In n with the enginen on?   Oldog Posted on Monday, July 21, 2014 - 12:14 pm:        yes to be sure that it is done right.   Tygun Posted on Monday, July 21, 2014 - 02:40 pm:        Im not sure if i need to remove the cable from the ecm and put it on again before the reset? Or just do the reset?   Zac4mac Posted on Monday, July 21, 2014 - 11:04 pm:        Ride the bike for 10 miles(16km) or 30 minutes to get to operating temp. Do the manual TPS reset(WFO->closed->WFO)3X. Enjoy the ride Zack   Figorvonbuellingham Posted on Tuesday, July 22, 2014 - 01:04 am:        Want to sell the high bars?   Tygun Posted on Tuesday, July 22, 2014 - 07:01 am:        Really? I Think the bike should be cold when you do it? I Think i have read it some where? Yeah if you wanna buy it.. Give me you email Then   Figorvonbuellingham Posted on Tuesday, July 22, 2014 - 09:49 am:        Where are you from.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: