G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Workman482 Posted on Sunday, July 20, 2014 - 03:14 pm:        Does anyone have a MAC chart for labor times? Looking to rotate the engine and take off the headers, but I want to know what the labor time is.   Brokengq Posted on Sunday, July 20, 2014 - 03:25 pm:        I don't have a MAC, but I was told its 5-5.5 hours to rotate. Headers I would guess another half to full hour.   Workman482 Posted on Sunday, July 20, 2014 - 06:12 pm:        Thanks. I was surprised to find that there isn't one in the service manual. Someone knocked my bike over while it was parked and I have oil seeping down the side of the bike even after wiping it down a few times. If I can't tell where it's coming from after removing the throttle body tray I'm going to rotate the engine.   Brokengq Posted on Monday, July 21, 2014 - 12:18 pm:        When I did my first rotate it took me about 10-12 hours down and up. I was overly meticulous. It went well. Just make sure you follow every step.   Workman482 Posted on Monday, July 21, 2014 - 08:30 pm:        Alright, thanks.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: