| Author | Message | ||
     Tommymac92 |
I know there were some issues with the instrument clusters in the past. I am hoping I just dint reconnect something. I did the rotor swap, new tires and brakes and did a good shakedown ride today. bike rode great. However I noticed the speedo and odometer didn't work. The tach, signal and warning lights all seemed to work fine. Just the speedo, odometer and gear indicactor didn't work. I also put in a new ECU for the barkers exhaust. Any thoughts on where to start. I will also be digging into the manual shortly to look for ideas. TIA Tom M | ||
| Nillaice |
Those are run off the VSS signal It's a 3 wire connector. VSS attaches to the back side of the engine, to the right of center line | ||
| Tommymac92 |
Found it and reconnected it. I may have had it unconnected when I did the rotor swap and put it back together. At least it was one easy problem to solve LOL | ||
| Chameleon |
For future reference:   Speed Sensor (VSS) connection. It's got 3 connectors in a triangular configuration. Perspective is from the right-front of bike looking toward left-rear. Yes I removed the NOID later on. |
