G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Cravacor Posted on Monday, July 07, 2014 - 11:46 am:        I have finally gotten around to replacing the seal again. Just took everything off yesterday. The new seal is at the stealer, I'll pick it up today. I have examined the pulley carefully. There is a very faint wear ring on the pulley where it rides on the seal (it can be seen but not felt), but no damage to seal or pulley that I can see. Looks like the last time I installed the seal I may have driven it in too far because the edge of the seal is slightly recessed, not flush with the engine case. Going to make sure it is flush with the engine case this time. Any other ideas/recommendations as to why this thing is leaking again? Link to previous thread: http://www.badweatherbikers.com/buell/messages/290 431/721230.html   Cravacor Posted on Monday, July 14, 2014 - 12:27 pm:        Put the new seal in the freezer before I installed it this time, made sure it was perfectly flush with engine case. Rode 800 miles this weekend, not leaking!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: