| Author | Message | ||
     Stevdar |
Looking for a fibreglass race fairing for an 1125rr | ||
| Jdugger |
www.flexi-glass.com Send Trevor a note. | ||
| Stevdar |
more like this http://thekneeslider.com/images/2009/07/buell-1125 rr.jpg | ||
| Sl33py |
i got mine (not yet painted/mounted) during the firesale from one of the HD Dealers in CO. (Froggy maybe?) the full Buell race carbon - sweet! They had factory CF and FG versions which you may be able to track down. The stock/factory race set had the front/windscreen, sides, and belly pan:  like the above pace bike and RR. I always spot it from the different 4 bolts under the front windscreen attachment. You might be able to find the part # and search for that? The CF or FG race set? | ||
| Sl33py |
Ugh... The RR had different radiator mounting... I re-read your original question (sorry). Unsure which panels w/ with the different radiators. | ||
| Sl33py |
Hmm... looks like the same bodywork, but maybe different inner air routing?  ?? Sorry not more help. | ||
| Two_seasons |
why not buy new plastic fairing, install blanks for the headlights, mirrors? Cheap to do! | ||
| Jdugger |
Are y'all confusing the RR for the r, two very different machines? | ||
| Sl33py |
Jdugger - i know i originally did (and likely murked this question up for Stevdar). But looking at the RR picture below - it's the same bodywork, but with different internal air routing to the RR's radiators. The pace bike w/ same bodywork (just with headlights cutout) vs the RR being leaned over. And since the fiberglass bodywork is what he was looking for (for his 1125RR (lucky bastard)), the stock full race FG or CF should work right? Flexiglass or others might as well, but would still need whatever internal ductwork to direct air to the different radiators on the RR. And since almost all race bodywork needs custom mounting brackets to fit ( i think flexiglass has a set premade), most should work unless his internal ducts are messed up? That sound right? Since there was supposedly a whopping THREE 25RR's sold - not exactly a huge # of folks familiar with them. Unless you call EBR (which still might be the best source of concrete info). | ||
| Stevdar |
no i dont have an RR haha, wish i did but i would like this look, found this though and it seems pretty close http://www.airtech-streamlining.com/buell/1125R200 8.htm | ||
| Rick_fears |
No the bodywork is definitely different. They are very similar until you get to the lower portion of the mid fairing. The angles are different and the rr has a sharp ridge where it connects to a completely different belly pan. But yes, similar. | ||
| Smoke |
http://thekneeslider.com/buell-1125rr-race-only-mo torcycle/ they have the buell p/n of the rr bodywork in this write-up. tim |
