Author |
Message |
Dvdreith
| Posted on Wednesday, April 30, 2014 - 06:25 am: |
|
I did a search to find locals that also currently frequent this board, I would like to meet with some 1125r guys, to maybe hear some exhausts in person. Also I would like to see if someone who is familiar with this bike could tell me if the jerkyness (even at 4k) is normal or a tad excessive. I do plan on the ebr ecm but it never hurts to meet with other enthusiasts. On another note, where in NH is there a recommended 1125r mechanic? Manchester HD? Ill search some more and thanks for your time in advance. |
Fluffy282
| Posted on Friday, May 09, 2014 - 01:42 pm: |
|
I'm in Maine, about 2 hours from concord. Once I get my stator all done you can take my cr for a ride jardine rt-5 and ebr ecu. |
Froggy
| Posted on Friday, May 09, 2014 - 02:08 pm: |
|
Coming up next weekend is the ADK rally in Lake George, NY, looks to be about 3 hours from you, there will be a few different 1125s there. http://www.badweatherbikers.com/buell/messages/406 2/735286.html Also, fueling on some of the older stock ECMs wasn't that great and can cause jerkiness, either getting the ECM updated by a dealer or swapping in a Race ECM will fix it. |
Fluffy282
| Posted on Saturday, May 10, 2014 - 08:32 pm: |
|
Eh... My ebr ecu didn't do much for the jerkiness ... Ultimately I'm disappointed with it, especially with all the "night and day" hype. |
Nikoff90
| Posted on Sunday, May 11, 2014 - 08:38 am: |
|
Fluffy i am in the same boat as you with the poor low speed fueling persisting. Jerkiness will only smooth out after cursing at 4000+ rpms for a bit will it go away. I have been tempted to get some plastic and turnout some proper velocity stacks in order to see what effect that would have but have been a bit too lazy to pull the air-box apart and have been fighting one thing after another on the CR otherwise. Yes I know someone makes them already but i would just prefer for the $$ to make my own + I don't want the heavy chunks of aluminum hanging on the TB. Wish I heard about the ADK Rally sooner I would love to come up but after being out of work from my surgery I am just trying to get caught up on expenses. I might see if I can stay with a friend up there but less than a week notice I think is not enough before dropping in on them. Anyone driving out from Western NY? |
Fluffy282
| Posted on Sunday, May 11, 2014 - 01:31 pm: |
|
Eventually I'd like to get my hands on a power commander and tune it all out. |
Dvdreith
| Posted on Monday, May 12, 2014 - 06:14 am: |
|
Nice I think I am going to go with the Keda rt3. still unsure as all the videos don't seem too loud but most people say otherwise. I have been doing a little bit of digging on the bike and it seems it has never had the updated fuel maps which could be the cause of the herkey jerky. also I have a historic code that is typical with the V6.1 IC's. unfortunately I work far too much to go over to NY for the meet. I would love to go but I have obligations to fulfill. |
Dvdreith
| Posted on Monday, May 12, 2014 - 06:17 am: |
|
Also Fluffy that sounds good to me. I hope the stator goes well |
Brumbear
| Posted on Monday, May 12, 2014 - 06:37 am: |
|
Dudes just pop in the rally camping is like $10 a night come on up Sat stay till sun. Or if you feel like spending a few more dollars split a room with somebody there are tons of motels there as well cheap this week. The campgrounds are http://www.dec.ny.gov/outdoor/24453.html and they are smack in town!!!! |