G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Chitown2014 Posted on Friday, April 04, 2014 - 09:57 pm:        New to the forum and I'm doing the VR upgrade. I took the HD harness off but I'm having a hard time figuring out what this connector is that goes to the harness. It goes down the left side of the engine and when I put the de-noid resistor in place it doesn't have anywhere to connect. Was it installed as part of the band aid harness and I can leave it hanging or is there something else going on?   Shawns Posted on Saturday, April 05, 2014 - 05:57 pm:        Its not needed. It was used to activate the relay   Dhays1775 Posted on Saturday, April 05, 2014 - 10:39 pm:        Shawn is correct. The wire was connected to the ECM to switch the relay on and off. Clip it and you're done. Or leave it. Up to you.   Chitown2014 Posted on Sunday, April 06, 2014 - 05:28 pm:        Thanks Guys!   Noobuel Posted on Sunday, April 06, 2014 - 11:15 pm:        When I took the HD harness out all my connectors were accounted for with paired gender connectors. One was populated with the denoid resistor plug.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: