| Author |
Message |
    
Nillaice
| | Posted on Friday, February 12, 2016 - 05:27 pm: | 
|
Mrred7,
I've only been sending out my Kent Moore locking tools because they have been otherwise unavailable until DeanAdamsDesigns recently started manufacturing them.
http://www.deanadamsdesigns.com/
as far as any other tools;
A torque wrench can be borrowed from your local auto parts store or avoided altogether if you can do math T=(F)L
This forum is a nice addition to the service manual which contains a wealth of information and specifications for this and other repairs. I have it on disc and I can include that in the box with the KM tools for your reference.
I can include a 32mm impact socket for the same $6.80 shipping costs if it'll fit in the flat rate box, along my bottle of 272 Loctite but i'll ask that you kick back a coin or 2 for the 272 (consumable and only available in $20-size bottles).
lastly, a lift table makes this job easier on your knees and back! |
Nillaice
| | Posted on Friday, February 12, 2016 - 05:28 pm: |
|
NOTE: Red Loctite 271 is commonly available, but its the wrong stuff for the rotor nut. Red Loctite 272 is rated for large diameter fastener applications up to 36mm, where the 271 is only rated up to 25mm. also take into consideration that motor oil penetrates metal and does a great job of lubricating metal to metal surfaces ... even threaded ones.
Now I haven't been able to find 272 in the tiny tubes, only the large-ish bottles. I guess they figure a professional would be using it if he/she to torque down pressure vessel head or ASME code pilot operated relief valves, not the homegamer.
I know this is old news to some, but it bears repeating. http://badweatherbikers.com/buell/messages/32777/1 00212.html?1109648598 |
Nillaice
| | Posted on Friday, February 12, 2016 - 05:41 pm: |
|
Sirius815,
it sounds like you are ready to start turning wrenches. I'll PM you so that you can get to it.
hopefully you'll be done before Mrred7 is ready to start wrenching and you can send it to him, then he can send it back to me. |
Nillaice
| | Posted on Friday, February 12, 2016 - 05:55 pm: |
|
Sirius815,
Czech yowr inboks |
Terrys1980
| | Posted on Friday, February 12, 2016 - 05:57 pm: |
|
If you guys need another tube of 272 to share, I can supply it. We have tons of it here at work. |
Nillaice
| | Posted on Tuesday, February 16, 2016 - 11:47 am: |
|
Terry,
that's be helpful, but don't get yourself in trouble |
Nillaice
| | Posted on Tuesday, February 16, 2016 - 12:48 pm: |
|
Ben and Jason,
I got PM's from both of you and replied. I'm not gonna try and complicate this and play middle man.
first one to send me the deposit gets the locking tool first. there are others on here with locking tools to lend. |
Nillaice
| | Posted on Tuesday, March 01, 2016 - 05:55 pm: |
|
I received Ben's deposit |
Imblasted
| | Posted on Saturday, March 12, 2016 - 08:14 am: |
|
Anyone have a crank locking tool available? If not I'll just buy one from Dean |
D_adams
| | Posted on Saturday, March 12, 2016 - 10:40 am: |
|
I only have a couple left out of the last batch. I can get more made if needed though. |
Imblasted
| | Posted on Saturday, March 12, 2016 - 02:09 pm: |
|
When does the cam lock get used? |
D_adams
| | Posted on Saturday, March 12, 2016 - 02:26 pm: |
|
Only if you're removing the timing chain or pull the cams for whatever reason and need to make sure it's locked in place. |
Imblasted
| | Posted on Saturday, March 12, 2016 - 02:33 pm: |
|
Should I just buy it off your site? |
Nillaice
| | Posted on Saturday, March 19, 2016 - 12:16 pm: |
|
I got by tool back and refunded Ben's deposit |
Pwillikers
| | Posted on Tuesday, May 31, 2016 - 06:14 pm: |
|
Nillaice, would you be so kind as to lend me your crank locking tool? Is it currently available? Thanks, Paul. |
Nillaice
| | Posted on Thursday, June 02, 2016 - 01:19 pm: |
|
yes |
Chitown2014
| | Posted on Friday, June 03, 2016 - 08:36 am: |
|
I'm selling my crank locking tool. Bought from Twin Motorcycles and used once. $100 plus shipping takes it. It took nearly a month to get it from Twin since it apparently takes forever for something shaped like a giant armor piercing bullet to clear customs. |
Pwillikers
| | Posted on Friday, June 03, 2016 - 11:10 am: |
|
Thanks Nillaice. I've sent you a PM. I have large sockets but please send along the 272.
(Message edited by pwillikers on June 03, 2016) |
Mrred7
| | Posted on Friday, June 03, 2016 - 12:51 pm: |
|
Hey guys. I am finished with my EBR crank locking tool (p/n: C2115.1B6), 32mm deep socket and 272 Threadlocker. If anyone needs to borrow mine, let me know. Just pay for shipping both ways... No need to pay to rent it out ($12 total). Just don't be a jerk and steal it! haha
(Message edited by mrred7 on June 03, 2016) |
Wesbronco
| | Posted on Tuesday, July 25, 2017 - 04:06 pm: |
|
Is this crank locking tool trading system still in effect? I have all my parts and ready to do the upgrade, just need the locking tools if anyone down to share. |
