G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Andros Posted on Thursday, January 23, 2014 - 07:36 am:        Just drained the bike and removed the oil filter. Apart from replacing the 2 washers on the drain plugs and replacing the o-ring on the oil filter cover, should i use loctite to secure those? I cannot find the answers in the manual even though that there was some kind of loctite on both plugs when i took them off.   Two_seasons Posted on Thursday, January 23, 2014 - 08:18 am:        Don't do it. Torque to proper spec...done!   Jdugger Posted on Thursday, January 23, 2014 - 08:53 am:        No loctite. On fluid retaining bolts I just safety wire them after torquing to spec.   Andros Posted on Thursday, January 23, 2014 - 10:50 am:        Thanx guys!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: