| Author | Message | ||
     Matteson |
http://www.buellxb.com/Buell-XB-Forum/Buell-1125R/ Fork-seal-conundrum this is what is going on and am stumped as to which spring I can get now anybody ever had this happen to them? | ||
| Zac4mac |
All my manuals are at the shop. Heading in soon, I'll post the p/n when I get there. Z | ||
| Matteson |
Its not the springs. It appears I need the whole lower sectiom | ||
| D_adams |
2008 part number was J8113.1AMB | ||
| Zac4mac |
So do you need an entire fork leg or parts? P/n for a whole leg is J0121.1AMA - left and J0122.1AMA - right. Dean's number is for a spring. Z | ||
| Tbowdre |
Wow, thanks previous owner! that is crazy | ||
| Matteson |
I don't need the whole leg. Which has the softer suspension? The early ama number or the latter amb? I guess they only make the amb now. So I will need to replace ama fork for an amb version? Jees, this is crazy( and expensive). So I can still use cartridge, damp. rod, tube and cap. Just need the lower part then. Reassemble and hope this never happens again. | ||
| Rodrob |
I have some parts and springs. PM me. | ||
| Matteson |
Thanks I order a set of stockers from hardley. Got the seals in this afternoon and dropped the tire off too for a new one. hopefully Ill have her all done by Sat. |
