| Author | Message | ||
     Kruizen |
So at the beginning of the summer I had some weird electrical issues with the cluster. That resolved themselves except for the speedo and odo. I am using the programmable EBR ECM, and have checked all the connections throughout the bike(nothings loose) All summer I have had no speedo, and the odo hasn't worked all summer. Now I am getting ready to start putting it back on the street, but before I order a new speed sensor, anyone have any other options as to what it is? | ||
| Froggy |
It most likely is the vehicle speed sensor needing replacement. | ||
| Cataract2 |
Does your horn work? If not then check that fuse. The fuse for the horn also powers the speed sensor. If that fuse is blown, check the horn wires down at the horn itself. They like to rub on the bracket and short. | ||
| Kruizen |
Turns out it was the fuse- thanks Horn switch is toast-guess I won't be passing va inspection anytime soon. | ||
| General_tso |
If you're putting it back on the street what will you be racing? | ||
| Kruizen |
The November race is iffy. Only took me 20 minutes to throw lights back on, kick stand on, remove belly pan. Trying to save a little on gas money, by keeping the truck parked. | ||
| Cataract2 |
Kruizen, did you check the wires down at the horn? They like to rub against the bracket and short. | ||
| 1125rcya |
Was your electrical issues "system voltage"? | ||
| Kruizen |
No lost everything in the cluster. then got back everything but the speedo and odo. Checked the wires by the horn alls fine there, but my horn button just flops and doesn't activate the horn. |
