Author |
Message |
Theshinenz
| Posted on Saturday, September 07, 2013 - 12:40 am: |
|
Can anyone help, I just bought a used 1125cr, which i noticed has clutch weep, then also noticed fluid leaking out the cover on the master cyclinder (near clutch lever top left hand corner). Anyway I just did the ebr cylinder upgrade which has now fixed the clutch weep, but i still have a leak on the master cyclinder cover. So i have spare part so change the cover, plastic and rubber seal, went for a ride (hard on the gas) and its still squirting out. Is it possible this could be from not bleeding the clutch well enough? Or has someone got another idea, the surfaces on the clutch master look ok. Thanks in advance. Scott |
Theshinenz
| Posted on Saturday, September 07, 2013 - 12:46 am: |
|
oh I also checked the level, it is not overfilled or under. |
Brumbear
| Posted on Saturday, September 07, 2013 - 03:30 pm: |
|
probably cracked the little plastic piece underneath? |
Theshinenz
| Posted on Sunday, September 08, 2013 - 03:40 am: |
|
thanks Brumbear, Ill check that out. If not i think i can get a spare master from a friend. |
|