| Author | Message | ||
     Paulp1125cr |
Hey guys, I just recently put my stock rear signals back on my cr and noticed the the rear left signal is extremely weak all the other signals are good. Any ideas? I checked the wires and everything looks good. Any help would be appreciated. | ||
| Shawns |
Check the ground for the light. ground it directly to the battery and see if it changes anything. | ||
| Paulp1125cr |
I'll try that, thanks | ||
| Froggy |
It is very possible the signal itself is bad, the older revision of the signals had a high failure rate. I'd do what Shawns says, and also try swapping it with the other side or the front signals and seeing how it reacts. | ||
| Paulp1125cr |
On the bullet connectors is the male usually the ground wire or does it vary? | ||
| Shawns |
I believe it is the male. Usually the power is female(less of a chance of it shorting to ground). |
