G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Shawns Posted on Thursday, June 13, 2013 - 09:13 pm:        I get an IAT displayed on the cluster on startup every now and then.   Shawns Posted on Saturday, June 15, 2013 - 07:05 am:        How do I test the sensor?   Zac4mac Posted on Sunday, June 23, 2013 - 05:57 pm:        I had to check Loretta before I said anything. The AT displayed should be close to ambient when you first turn the key on. It will update after a mile or so at 20 plus mph. Sometimes it isn't close to ambient but it is the temp the intake is seeing. IAT - Intake Air Temperature. Z   Shawns Posted on Sunday, June 23, 2013 - 09:47 pm:        So, do I just need to replace the sensor? The code I have is a P0113 intake air temp high/open   Oldog Posted on Monday, June 24, 2013 - 07:38 am:        check the connector first, make sure that its snapped in and check the wire condition going in. the sensor can be removed and changed with out tools, IIRC it twist locks into the mouth of the intake air horn just below and behind the bottom triple tree. right side as seen from the front of the machine facing the back. other wise yeah replace the sensor.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: