| Author | Message | ||
     Mortbike |
What target afr's does the 1125 engine perform best with for street riding? I was given a used Powercommander auto tune setup that I would like to experiment with and I need to set the target afr tables. Thanks for any help! Mort | ||
| Firemanjim |
13.4-13.6. Remember to get your AFV's to 100 then unplug o2 sensors. What pipe as I have several custom maps for PC V. | ||
| Mortbike |
Thanks Firemanjim- I have the Barkers Exhaust. I also have the EBR ECM for the Barkers exhaust already installed but I wanted to use the PCV on a dyno to fine tune/optimize the EBR tune for my particular bike and the fuel and sea level/weather here in south Florida. I also have an auto tune kit off my Harley XR1200 that I can use as well. I would appreciate any maps you can send to my email address: mgelberd@aol.com How has the PCV worked out for you on the 1125? How do I get the AFV's to 100? thanks, Mort | ||
| Firemanjim |
PCV works well, You can look at your AFVs in the diagnostic mode,if they are 100 you are good, if not I ran bike on dyno with the speed sensor unhooked so diagnostic mode will stay on. |
