G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jonesgw Posted on Wednesday, April 24, 2013 - 02:17 pm:        So, after all the fixes for Rotor Issue I then had a Starter Clutch Issue. While in the process of fixing the starter clutch they had to remove the modified rotor etc. From the looks of it, the weld/epoxy seems to be coming apart between the inner shell and the outer shell as well the inside of the rotor seems warped? (The warping is a little harder to see) Anyone have this issue or is this a non-issue, can i still use the rotor or will EBR replace this one as it's only been on my bike two months. Also should two of the outer teeth be missing as it appears in the photo or is that normal? Any suggestion would be more than helpful. Been trying to upload photos with no luck for the past hour and yes they are way smaller than 1024x1600.   Green1 Posted on Wednesday, April 24, 2013 - 04:53 pm:        Teeth missing is normal,gap is there so ecm knows where TDC is   Jonesgw Posted on Thursday, April 25, 2013 - 04:22 am:        If you happen to read this thanks for reading. After speaking with EBR they are going to correct the issue. Thanks EBR for such GREAT service and support! Thanks Green1 for feedback.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: