| Author | Message | ||
     Russmannnn |
Do you need a special tool to pull the rotor once the nut is off? | ||
| Jbarron |
No. It will slide off the splined shaft. | ||
| Bartone |
well.. when I did mine, I needed a rotor puller tool. I used a balancer puller tool that used the same m8 bolts used for holding the sprang clutch. But I was one of the rare people who needed that. | ||
| Kruizen |
I had to use a 3 arm puller from autozone. But I'm in the minority also by the sounds of it. |
