Author |
Message |
Jdugger
| Posted on Saturday, December 01, 2012 - 01:23 pm: |
|
I'm selling a 16.5" Magnesium wheel set up for Belt Drive. This thing is super light, and I can put a belt drive pulley and OEM rotor on it if you like. $200 for the wheel, $250 with pulley and rotor. There's a Pirelli SC2 on it now, probably 1/2 left.
|
Kruizen
| Posted on Saturday, December 01, 2012 - 01:54 pm: |
|
set up for 2 bearing or 3, is the $200 shipped? |
Jdugger
| Posted on Saturday, December 01, 2012 - 02:13 pm: |
|
2 Bearings, you pay shipping. |
Deanh8
| Posted on Saturday, December 01, 2012 - 03:41 pm: |
|
What do I have to do to run chain.. ? how much lighter? |
No_rice
| Posted on Saturday, December 01, 2012 - 04:28 pm: |
|
oooooooooh, how much of a pain is it to get the 16.5 tires though? much more expensive then the 17? and would you run this with a front 17? or need matching front. |
Jdugger
| Posted on Saturday, December 01, 2012 - 04:34 pm: |
|
Chain: It's a bearing swap, that's all. 16.5 tires: Pirelli and Michelin both make them. You are looking at a race only wheel here. You can mix them no problem -- just adjust the geometry. Most 16.5 tires are a smaller wheel, but more or less the same overall diameter as a 17. It's more tire, less wheel. It's way lighter than an OEM wheel. Several pounds. Do I need to weight it? |
Jdugger
| Posted on Monday, December 03, 2012 - 09:43 am: |
|
Someone really does need to buy this wheel. I want it out of my garage! |
Green1
| Posted on Monday, December 03, 2012 - 08:50 pm: |
|
I want it in my garage but coming up with $$ before christmas is proving to be a little tough |
1125rcya
| Posted on Tuesday, December 04, 2012 - 12:01 am: |
|
170 and a these bags + you pay shipping? http://www.americansportbike.com/shoponline/ccp0-p rodshow/5765.html Just PM me, I want that rim lol (Message edited by 1125rcya on December 04, 2012) |
Jdugger
| Posted on Tuesday, December 04, 2012 - 07:39 am: |
|
1125 -- I don't have a need for saddle bags on a race bike! I think my price is pretty fair for a wheel that was $2600 new. |
1125rcya
| Posted on Tuesday, December 04, 2012 - 09:30 am: |
|
Lol send me a pm.. for total amount due..shipping to 46131. If you could just have bearings pressed in for the belt drive. I have a spare pulley and brake rotor. (Message edited by 1125rcya on December 04, 2012) |
1125rcya
| Posted on Tuesday, December 04, 2012 - 10:49 am: |
|
Pm replied. |
Jdugger
| Posted on Tuesday, December 04, 2012 - 10:58 am: |
|
I got an empty message, btw... |
Bumpnzx3
| Posted on Wednesday, December 19, 2012 - 12:40 pm: |
|
I am the guy that sent you several text messages about it. Still ready to pay, if it's available...... |
Jdugger
| Posted on Wednesday, December 19, 2012 - 02:54 pm: |
|
Both this one and the 17" sold... |