| Author |
Message |
    
Jcjohnson33
| | Posted on Thursday, October 03, 2013 - 10:50 pm: | 
|
That is the barometric sensor it snaps in place on the airbox base under the seat. No hose connection just the electrical plug |
Rorod22
| | Posted on Thursday, October 03, 2013 - 10:54 pm: |
|
Right on thanks I knew where it kinda went the other two things were driving me nuts |
Rorod22
| | Posted on Wednesday, October 09, 2013 - 09:15 pm: |
|
What do I torque the 6 rotor bolts to ? |
Moorev2
| | Posted on Tuesday, January 21, 2014 - 09:14 am: |
|
Hey guys, I never posted on here before really but I now find my self in a situation where I need to tighten up my stator nut....I think....maybe someone here has heard this noise before, I have attached a hyper link to a video clip on youtube....it sounds bad. If this sounds like the stator nut...can I borrow someones crank locking tool?
http://www.youtube.com/watch?v=7QuIn6MRz2w&feature =youtu.be |
Nillaice
| | Posted on Monday, April 21, 2014 - 08:11 pm: |
|
I like your DIY audacity and I'm glad the top of that tool didn't snap off inside you engine, but im just gonna leave this here
http://www.badweatherbikers.com/buell/messages/290 431/734073.html?1398123730 |
Sl33py
| | Posted on Friday, June 13, 2014 - 05:48 pm: |
|
Looks like i'm due for diving in and doing this (#3 now, but first out of warranty to be by me).
Any locking tools available for rent or buy still?
Thanks! |
Weaponxbs
| | Posted on Saturday, March 21, 2015 - 08:13 pm: |
|
Not mine but just found, what looks to be an authentic crank locking tool, on FleaBay. If anyone is interested
http://www.ebay.com/itm/buell-1125cr-cr-r-1125r-cr ankshaft-locking-tool-/141611064424?hash=item20f8a d5c68&item=141611064424&vxp=mtr |
Shawns
| | Posted on Sunday, March 22, 2015 - 07:39 am: |
|
Thats one of 6 I had made up. Looks like the one I personally used. I sold it after I was done. $50 would be a good deal, they cost me just over $60 to get made. |
Demoniktriple6
| | Posted on Tuesday, October 03, 2017 - 10:53 am: |
|
pulling this thread from dead... we still doing the swap? |
Wesbronco
| | Posted on Saturday, October 07, 2017 - 12:16 am: |
|
@demoniktriple6 I don't know how much luck you will have with the swap. I reached out as well and never got a response. Order it from Twin motorcycles. Took less than a week to get it and it fit perfectly. |
Ceejay
| | Posted on Sunday, October 08, 2017 - 06:53 am: |
|
Ebr still has them too, at 76 and some change... |
Buell3some
| | Posted on Friday, November 10, 2017 - 08:48 am: |
|
I just saw this post. I have an EBR crankshaft locking tool, also have the EBR clutch slave install socket. Sold my 1125R a couple months ago. |
Demoniktriple6
| | Posted on Friday, November 10, 2017 - 11:41 am: |
|
Cool man, I haven't done anything with mine yet - been too busy flying. Feel like selling your locking tool? |
