| Author | Message | ||
     Njdevils1990 |
Having issues with the clubman bars, does anyone have a picture of the right and left side where the wires, brake/clutch lines and throttle cables go into the front faring? And main issue is routing the throttle cables, they work fine untill I go full lock right they bind against the inside of the headlight housing. | ||
| Pwillikers |
Is yours an '09 CR? Did you have the high bar kit installed? Do you have the high bar kit's longer throttle cables? | ||
| Njdevils1990 |
It is an '09 CR and I did. Have the high bar kit. I just bought a clubman bar and all the hardware(shorter cables and lines) and I had no problem getting the short cables in position just when everything is hooked up it binds up at full lock and I don't think I have it in the right spot or the bars are in the wrong position. | ||
| Notpurples2 |
I put the clubmans on my high bar equipped CR without switching out the long cables. I posted pictures... They may be helpful. http://www.badweatherbikers.com/buell/messages/290 431/601874.html?1288389984 If you think you might want to swap handlebars from time to time you can use the long cables. |
