G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Gasteward Posted on Tuesday, July 26, 2011 - 10:56 pm:        I have seen some nice pictures of 1125s on this site, thought I would share mine. My 2008 now has 5,000 miles (no issues) I added the reservoir covers, rear tail kit, shifter/brake, Erik Buell Racing ecm and Barker muffler with quiet insert. I ran it for a while with the Jardine and Pro-tune (which worked well) but it was too loud. The Barker has about the same top end, but more middle TQ. I also put on the factory lowers with the 2010 graphics that seemed to fit perfectly.   Guambra2001 Posted on Wednesday, July 27, 2011 - 12:04 pm:        Looks very clean and nice, love the fairings. Great looking bike.   Tmoreno Posted on Wednesday, July 27, 2011 - 02:53 pm:        where did you get the 2010 graphics?   Mcfly Posted on Tuesday, August 09, 2011 - 04:17 pm:        Hey, great pics!!! Very nice bike. Curious, which fender eliminator kit / license plate relocator did you use? Also, how did you get light to shine down on the license plate? I also have an '08 and I'm trying to figure out what I need to order from American Sport Bike's website. Thanks!   Avalaugh Posted on Tuesday, August 09, 2011 - 05:16 pm:        I miss my shiney black plastics, will have to locate some more next year. Your bike looks very tidy, I would advise you start looking at getting the parts for the rev B clutch cover before your leak starts, it's only a matter of time.   Pmjolly Posted on Tuesday, August 09, 2011 - 08:51 pm:        The revised clutch seal kit will fit inside the Rev A cover just fine. You don't need a new clutch cover.   Juniorkirk Posted on Tuesday, August 09, 2011 - 08:59 pm:        McFly, http://www.americansportbike.com/shoponline/ccp0-p rodshow/16211.html looks like that one from American Sport Bike. I have this one as well and you only need this kit. The stock license plate bulb fits in it to shine down on the plate. Good construction and nice look, i would recommend it   Mcfly Posted on Tuesday, August 09, 2011 - 09:34 pm:        Junior, I wish I could see a better pic of it. I like the of retaining yet relocating the stock license plate light, but that pic on American Sport Bike is so small I can't really see what's going on with it.   Juniorkirk Posted on Wednesday, August 10, 2011 - 12:07 pm:        I'll take some pictures and post them in a few hours when I get some free time. It is a really nice mount and EXTREMELY sturdy, a few of my buddies helped me lift it into the back of a truck and one of them lift from the eliminator   Juniorkirk Posted on Wednesday, August 10, 2011 - 08:37 pm:        Here are some pictures of the one that i linked to earlier. Got the stock turn signals on it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: