G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dcmortalcoil Posted on Monday, May 02, 2011 - 08:58 pm:        ECM connector's seal (orange color material) broke. Anyone have this issue? I ordered the OEM connector (Tyco/Amp 4-1437290-1 (Grey) and 4-1437290-0 (black)). My question is, does the seal (orange color material) come off the connector so that I can just swap the seal or do I have to take the pins out and put them in the new connector? I'm hoping that the seals just pop out. I haven't messed with it yet as I have not received the connector. I also have asked the same question in the Knowledge Vault.   Dannybuell Posted on Monday, May 02, 2011 - 11:03 pm:        Yes the seal is just a fancy shaped piece of rubber that you can use a pick to get out.   Dcmortalcoil Posted on Tuesday, May 03, 2011 - 02:03 am:        Thanks. That's a great news. Too bad I couldn't just buy the seals.   Dannybuell Posted on Tuesday, May 03, 2011 - 09:45 am:        you could wrap it with electrical tape or just pack it with dielectric grease.   Skntpig Posted on Tuesday, May 03, 2011 - 09:20 pm:        Good quality electrical tape and go...

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: