| Author | Message | ||
     Professorbarnhouse |
Hey- this is my first post! I'm putting a salvage CR backtogether for a winter project, or trying to, does anyone know of a supplier for AMP multilock connectors, and maybe some part numbers? Two wires on the harness end of the plug from the R/H switches are broken off. If I can find the pins I can repair the damage, and given the circumstances, I like to have as many non H-D related parts sources as possible. | ||
| Xnoahx |
Drag specialties sells them. If you have a local cycle gear they can order them for you. You will probably have to buy a package of them though. Or you could just order them online from dealers out there if you dont want to support your local economy. | ||
| Dktechguy112 |
I used mouser.com when I had to get an IC connector for my 1125. It was wrecked, and during the wreck the Instrument cluster was crushed so badly that it also broke the wiring harness connector that plugs into the ic. Harley said the part was backordered. I went to mouser and they had thousands of them in stock. I couldn't find a part number, so i had to look through the pictures until i found the right connector. http://www.mouser.com/ProductDetail/Tyco-Electroni cs/174047-2/?qs=1Fv0GIFcFsukQXboC9TyLQ%3d%3d | ||
| Professorbarnhouse |
Thanks folks! |
