| Author | Message | ||
     Wrong36 |
has anyone done it yet? pictures? thanks! | ||
| Zac4mac |
I've seen a couple of CRs with the Acerbis handguards with the optional LED strip for turn signals. They looked to be a VERY good fit. See this thread - Mac_inger's bike has them, no LEDs tho.. http://badweatherbikers.com/buell/messages/290431/ 543037.html?1267569657 Zack | ||
| Tattoodnscrewd |
Search is your friend .. A few people have done a few different types of handguards .. But here are the CityX handguards... http://www.badweatherbikers.com/buell/messages/290 431/587838.html?1282184307 | ||
| Wrong36 |
awesome, thanks! i only searched for "handguards". great job on those! | ||
| Cringblast |
 | ||
| Wrong36 |
great pics! now... [pushing it] does anyone have step by step instructions? ha | ||
| Tattoodnscrewd |
If you remove the stock mirrors like Cringblast, the wind deflectors are fairly easy to put on, I don't believe much modification if any is needed other than maybe shortening the arms on the clutch side. The way I did mine you would have to cut off the top arms on both sides and shorten the lower arm on the clutch side if my memory serves me correct. Then drill for the new mounting hole, and heat and bend the lower arms for optimum position. On the 1125's the clutch and brake sides are pretty much mirror images, on an XB thru are not, which is why the two deflectors are molded different and why slight modification is needed on the clutch side. | ||
| Singularity79 |
what kind of handguards are pictured by Cringblast. I want em! |
