| Author | Message | ||
     Jmkushla |
i am looking to clean up the tail. i wanna relocation kit that mounts off the rear axle. will a universal kit work? please help | ||
| Lastonetherebuys |
I made mine out of a piece of aluminum plate and a cut off tool for the die grinder can post some pics once I get home | ||
| Jmkushla |
that would be great. i am very mechanically challenged so if you could add some details to the build that would be great. | ||
| Motorhead102482 |
I would say the one from American sportbike is pretty clean, and well constructed, but a bit pricey. I like the way mine looks though. | ||
| Lastonetherebuys |
ment to do this last night, forgot, was out riding till after midnight.    simply made a flat card board template, transfered to a flat piece of aluminum, used cutoff tool to cut out, bent plate mounting to angle desired and drilled mounting holes for bracket and plate. Needed longer bolts to mount bracket. 10mm by about an inch and a half long if I remember right. | ||
| Lastonetherebuys |
oh ya forgot to mention pulled tail lamp and cut out template that is already in the plastic casting in the tail section for the licence plate lamp |
