| Author | Message | ||
     Mr_incognito |
Ok, I have no idea how to use TunerPro or where to get it or anything lol. Im looking to try and play around with my idle settings, but I dont even know where to start. Can someone put it into dummy terms for me please? Walk me through this and pretend your talking to a complete moron. | ||
| 99buellx1 |
Not to be mean, but I know that if I had no idea how to do it....I wouldn't. (and I dont so I wont) Not blowing my bike up is more important to me than tinkering. I realize everyone has to start at zero, but I would find someone locally that can help and show you how. | ||
| Pash |
This will help you: http://www.ukbeg.com/forum/viewtopic.php?p=91377#p 91377 ECMRead will identify your firmware, so make sure you download the correct XDF file from ECMSpy.com. Report back and we'll show you what to do next... (Message edited by pash on June 21, 2010) | ||
| Curve_carver |
Download tunerpro download the correct xdf file for our bikes. Get a Ecm cable download ECM mono read it's very easy to use once you get the right downloads. Make a seperate tunerpro file on your desktop. When you download your firmware from your bike with mono save it to your tunerpro file. Mono will automatically make a xpr file and a tx file. You then go to tunerpro and open the xdf file so it knows what function the program needs. Then load your xpr file . This can be done under open bin file. I'm playing with my new race ecm. Tunerpro reads it. Ecm spy will not download the ebr calibration. I tried. Only mono will. My ebr ecm is still snatchy down low and the idle is too low . It has stalled a couple times on me. I fixed that and added 3% more fuel disabled the 02s and wow this bike really runs great now . It didn't suffer any loss on top end or down low. Its all around perfect. Idles right at 1450-1500 . I believe ebr was setting em to low. It rattled too much and stalled here and there.yeah for tunerpro!!!! |
