| Author | Message | ||
     Jules |
We make it for the 2008 1125R and the 2009 1125CR This may be a stupid question but will the 2008 1125R map work on a 2009? Sorry if that's a REALLY stupid question Oh and presumably if the internet delivery option pans out we'd just need to buy a cable to connect the PC/Laptop to the ECU? Personally speaking I'd rather have a dowloadable file rather than a "real-time" connection if that's an option  (Message edited by Jules on February 26, 2010) | ||
| Easyrider |
Jules, No It wil NOT, different injectors and different calibrations. | ||
| Easyrider |
Jornum1, Here is another company that works well with us, The owner is really happy, that all works well, and he has happy customers: http://www.freespirits.it/prodotti.php?lang=2&cat_ id=13 | ||
| Jules |
Jules, No It wil NOT, different injectors and different calibrations. Ah - OK Silly question No2 then (Sorry) would you be doing a map that'll work on an 09 R? Thanks for the response | ||
| Eece_ret |
http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=290431&post=1741518#POST1741518 Second line. | ||
| Easyrider |
Jules, I make one for the 1125R 2008 model and 1 for the 1125CR and 2009 1125R | ||
| Jules |
Sounds superb - thanks | ||
| Louisiana_xrider |
If I can hear a better sound clip (i.e. take off, drive-by, plus high rpm) there might be another order. I want good performance,and style to match the attitude of the bike, but i am not looking to attract the attention of everyone within a 2 mile radius. Hope to see some more vids posted soon. | ||
| Rt_performance |
Jules do you have access to a dyno? barker and kn map will be request for my 2009 1125 | ||
| Jules |
Yeah I can pop along to the local tuner, unfortunately because of the weather here I've still only managed to get 200 miles on the bike so I don't plan on doing that until the summer sorry.. | ||
| Thefleshrocket |
When the exhaust packing "wears out", what exactly happens? Does the exhaust just get louder, and maybe more raspy sounding? I ask because my '91 CBR600F2 has had a Two Brothers exhaust on it for about 30K miles (the bike has more than 40K on it) and I've never repacked the muffler. The bike is moderately loud at part throttle and cruising speeds but has one hell of a wail under WOT at high RPM. Quite frankly, I don't mind that one bit, so if that's similar to what I have to look forward to when the Barker exhaust's packing needs to be replaced, that's just fine with me. | ||
| Dannybuell |
my s1's d&d packing has been gone for at least 6 years. after wearing out pop rivets I just gave up and welded her shut. short shifting is good for keeping it down. barks like a big dog when you hit it. dannybuell | ||
| Jonesz0003 |
Is there going to be a better sound clip for this exhaust and whats the eta on the tune for this exhaust do we know yet? | ||
| Puzzled |
Jornums pics.       | ||
| Rockstarblast1 |
Dumb question but how does one get there bike up onto a table like that to work on? Haha I'm serious it doesn't look like it raises and lowers like a mc lift.. | ||
| Louisiana_xrider |
I use to have a table like that and i just used the same ramp i would load the bike into a truck with. | ||
| Jornum1 |
Ha, exactly xrider. I just use my trailer ramp. I made that table out of scrap wood about 6 months ago. I don't know why I didn't sooner. Its so nice not to have to kill your back working on the bike! | ||
| Jonesz0003 |
Jornum are you going to dyno it soon and get a good sound clip | ||
| Justa4banger |
wow looks great... can't wait to hear the review  | ||
| Jornum1 |
I don't have any plans to dyno it. Don't have access to one. I will get a decent vid tomorrow. I don't have anything fancy, but will set up my camcorder and do some drive bys, ect. I don't have the quiet core yet,this will be just the standard stand alone pipe | ||
| Jonesz0003 |
Sweet thanks cause im trying to determine how loud it is and about what pipe is it around in how loud it is? I hope that kinda made sense on how to ask that haha | ||
| Jornum1 |
I had a jardine, so I will be able to give a decent comparisson in loudness. I am in the same boat as you. I have the qc on order as well. So I can give a good comparrison of qc vs no qc. | ||
| Freight_dog |
Not really a fan of the style but that finish is phenomenal.  | ||
| Ratsmc |
Dris, I tried to find this at the Twin Motorcycles site but it is a bit hard to navigate. What will you charge for the tune for the Barkers exhaust? | ||
| Easyrider |
Ratsmc, I still wait to get the Barker exhaust for making a Fuelmap. You guys have to watch www.fuelsolutions.nl I Know the site is not up and running, But we are working on that hope that it is up next week. There we will communicate prices and different services. | ||
| Thefleshrocket |
Easyrider, what do you think the price will be for a tune to work with the Barker exhaust? Thanks! | ||
| Easyrider |
We Hope to have prices finished next week.. Post them here asap | ||
| Puzzled |
I look forward to the custom map. | ||
| Redliner172 |
That is one sexy exhaust. I would consider purchasing and selling my Jardine BUT I would have to modify my lower..and I don't want to do that. VERY nice though. | ||
| Jornum1 |
Are you speaking of Buell stock lowers? The exhaust will fit, see the pics above. |
