Author |
Message |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 03:19 pm: |
|
has it been done? if so pics please. did u have to take the 1125r pods off or mod the uly pad at all. if it works what is the benifits of haveing them on |
Froggy
| Posted on Sunday, February 28, 2010 - 03:23 pm: |
|
Yes, it has been done. http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=290431&post=1731138#POST1731138 No modification needed. |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 03:25 pm: |
|
that is on the cr. i dont think they will really do much on the r would they |
Froggy
| Posted on Sunday, February 28, 2010 - 03:33 pm: |
|
Why wouldn't they? The frame and radiators are the same. The biggest difference between the two are the front fairing and swingarm. |
Jules
| Posted on Sunday, February 28, 2010 - 03:37 pm: |
|
I would have thought it would do the same thing for the R as it does for the CR - after all they're the same frame etc.. |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 03:56 pm: |
|
i guess what i was asking is is that a spot that usually hits when you tip your bike over. because i am just trying to get a set up to keep my bike off the ground in a tip over. |
Duggram
| Posted on Sunday, February 28, 2010 - 04:02 pm: |
|
Last year I crashed on track (with my 1125 racer) and got a few deep scratches right at the triangle point on the frame. I have Uly pucks now and they fit just fine. Smart move! |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:08 pm: |
|
how do the uly pads mount on. so it would be a good move to prevent scratches? if i get these will they do the same job as the frame sliders i have seen on here |
Duggram
| Posted on Sunday, February 28, 2010 - 04:12 pm: |
|
Stickum. Can you imagine trying to weld up one of these frames? Which frame sliders are you talking about? |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:15 pm: |
|
the ones from blackflash |
Duggram
| Posted on Sunday, February 28, 2010 - 04:22 pm: |
|
I think I know what you are talking about. I'm sure those work. These just look a little better and they don't screw in to the engine mount (which I really don't know if that's a negative). |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:40 pm: |
|
so they do the same thing. |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:40 pm: |
|
i am just tryin to keep my bike off the ground |
Duggram
| Posted on Sunday, February 28, 2010 - 04:51 pm: |
|
I hear ya. I've had mine down a few times. I'd rather replace protection devices than Buell parts. Just ask Keith at DHM, I'm a good customer. |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:53 pm: |
|
do the uly pucks do the same thing as the frame sliders? i ordered the uly pucks so we will see what they look like |
Duggram
| Posted on Sunday, February 28, 2010 - 04:56 pm: |
|
I don't know if they stick out the same distance. I can say if I had the pucks on last year my frame wouldn't be scratched. |
Kevinjgray88
| Posted on Sunday, February 28, 2010 - 04:58 pm: |
|
well i will throw some pics up when i get them installed |