| Author | Message | ||
     1340busa |
my left rear blinker lights up but will not blink. its not the blinker as i swapped sides and it worked. is there a seperate flasher for each blinker? | ||
| Hdwrenchtx |
they are controlled by the instrument cluster and there is no flasher as far as I know. i tried to install one of those signal minders...didnt work | ||
| Ratbuell |
Bad blinker works on the good side...does the good blinker work on the 'bad' side? Front blinkers both work as designed? Sounds like you have a wiring issue in the tail. Have you had it off for any reason? AFAIK, the cluster has a L channel and a R channel for turn signals, not four channels (LF, RF, RR, LR). If the fronts are working, it's a wire somewhere to the tail. And for the record - yes, the cluster runs the signals on the 1125. There is no "flasher". | ||
| 1340busa |
the wires from the left rear are not flashing. it just has a continous power supply. both fronts are working as is the right rear. | ||
| Ratbuell |
Check the right rear. I'm not familiar with the circuit - does the working signal cut the ground to flash it? (continuity test from ground lead to chassis ground; you should get a continuity "flash" if that's how the circuit works, a VOM that beeps for continuity makes this easy-peasy to check). Maybe left rear ground lead is...grounded out to the chassis somewhere. |
