| Author | Message | ||
     Kytann |
Sorry for the noob question. If there is an FAQ or something please point me to it. I'd like to take the cover off and inspect it. (Message edited by kytann on January 07, 2010) | ||
| Brumbear |
you don't need to pull the entire airbox take the 4 torquescrews off the cover unclip the plastic undercover pop the rubber filter band and the throttle bodies will be there also when you are done cleaning the boddies do a tps reset in the manual | ||
| Ccryder |
Look here for some help: http://www.badweatherbikers.com/buell/messages/290 431/525759.html?1262444914 To remove the air box cover you need a T30 Torx bit. Remove the seat two T30 screws Remove four T30 screws two at rear two at front Gently pull the cover off unclip four clips on the air box and remove Later Neil S. | ||
| Kytann |
Thanks guys. Got the cover off. There's no oil in there Guess I'll start another post about the smoke | ||
| Kytann |
nevermind... (Message edited by kytann on January 08, 2010) |
