G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dsmitty25 Posted on Wednesday, November 25, 2009 - 12:16 am:        Whats the best place to hook up to the tach input on the 08R's for use on the dyno? I don't have the bike here or a wire scm. to look at and was curious? Dustin   D_adams Posted on Wednesday, November 25, 2009 - 12:24 am:        Three wires that go right into the cap on the coil. Clip around them all, it will work with an inductive pickup. Use the rear cylinder under the seat, easiest to get to.   Dsmitty25 Posted on Wednesday, November 25, 2009 - 12:26 am:        thank you thank you!   D_adams Posted on Wednesday, November 25, 2009 - 01:11 am:        You're welcome, glad I could help.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: