| Author | Message | ||
     Highlander51 |
I looking for black lowers for my 08 1125R. Are there any dealers out there with any deals? Thought I saw someone bought a new bike and got the lower fairing for $250 from a dealer. | ||
| Redscuell |
p.m. sent | ||
| Prowler |
I'm looking for a set of Buell lowers at a good price also. Any suggestions, folks? | ||
| Mountainstorm |
My Roanoke Valley HD/Buell dealer called me and asked if I wanted a pair they had on hand (NIB)for half off. I jumped on it. Don't know if they have more but you can check (540) 562-5424 | ||
| Pegasusrider |
I've been looking too, here's what I found so far: There's the full fairing and belly pan you can try to find from a dealer. Ilmberger - makes carbon fiber pieces(not at all cheap) Catalyst Racing Composites - may not match up to stock pods My local dealer had a bike with aftermarket fairings I haven't seen anywhere else-I'll talk to them to find out who made them and let you know | ||
| Jammin_joules |
High Country Buell/H-D is offering special costs on the 1125R lower side fairing kit: (Part #M2296.1AMMW) These are black only for finish. We are offering these at $339 (corrected 11/20) plus sales tax while supplies last and we do not expect there are an abundance of these available. We've previously sold several of these at full price on some bikes and they look sharp. If you want one of these, call parts at High Country Buell 720.881.3678 If shipping is required, that will be additional. Payment can be made by credit card. ~jammer (Message edited by Jammin_Joules on November 20, 2009) | ||
| Prowler |
Jammer, bought a set of lowers from High Country on Wednesday. Correction needed on the price you posted, as I was told that they were $339 not $329. Still not a bad price. (if you guys are selling them for $329, tell the guy in parts I want my $10 back...  | ||
| Vosnick52 |
I am pretty sure Airtech makes lowers/bodywork for the R. | ||
| Homer007 |
Do the fairings fit the cr? | ||
| 99buellx1 |
Not directly, they interface to the upper fairing on the R and cover the pods. You would probably be better with one of the aftermarket setups that interface to the bottom of the pods. | ||
| Homer007 |
thanks.. i mistakenly assumed that only the front cowls were different on the two bikes and that the pods were identical. btw, how do you do quotes in the posts? | ||
| 99buellx1 |
Look here: BWB Formatting Page | ||
| 99buellx1 |
I think the pods are the same, but the Buell fairing kit goes over the pods and above them and connects to the upper fairing (which the CR does not have). Here's a pic that kinda shows what i mean, you can see that the fairings go quite a ways above the pods, which would all need to be cut off or something if you were to put them on a CR.  | ||
| Homer007 |
awesome.. thanks... i see what you mean now by looking at the pics. i may go with just a chin spoiler for the cr.. | ||
| Jammin_joules |
I was informed by my parts manager I mis-quoted, it is $339 plus applicable taxes. Sorry, my bad.  | ||
| Ironjim |
I also ordered a set from High Country on Wednesday. Derrick was the parts guy I dealt with. Seemed like a decent guy. Assured me they would have them soon. Jim | ||
| Highlander51 |
Ordered mine today from High-country Harley, Thanks for the heads up. Mike |
