G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ezblast Posted on Thursday, November 05, 2009 - 02:01 pm:        Rear Sensor Wire Protector - that should be tight/connected to the sensor - right? - Not hanging loose where vibration will sooner or later have the metal wire protector cutting the wires it is meant to protect. EZ   Xtreme6669 Posted on Thursday, November 05, 2009 - 11:32 pm:        o2 sensor?   Ezblast Posted on Friday, November 06, 2009 - 12:02 am:        Yes! - Is that guard supposed to be loose on the wire? EZ   Xtreme6669 Posted on Friday, November 06, 2009 - 12:07 am:        mine is "loose" on the wire as well but its a pretty light weight heat shield so I really doubt it will wear its way thru the wire insulation... the front is the same way but because the wire in the front doesn't curve as much it sits on there straighter.   Ezblast Posted on Friday, November 06, 2009 - 12:12 am:        As long as that is the norm - I guess I'm ok - didn't show it in the service manual, only the parts book - so I wondered if it was compression fitted and just poped off and needed re-fitting. Thanks! EZ

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: