G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Aeholton Posted on Wednesday, October 28, 2009 - 08:37 am:        My business partner has a dyno and I would like to get some base line runs on my new 1125r. Does anyone know which and where the wire is for hooking up the tach on the dyno?   Badlionsfan Posted on Wednesday, October 28, 2009 - 09:45 am:        can't ya go off the plug wire? should be able to get the rear plug with the seat off I think.   Aeholton Posted on Wednesday, October 28, 2009 - 10:04 am:        Yeah, guess we can do that. Just wanted the easiest way. Thanks.   Badlionsfan Posted on Wednesday, October 28, 2009 - 10:10 am:        I think that'd be the way to go, god knows where the tach wire is. Thinking out loud, but if the tach gets the signal thru the ECM would it work anyway?   Zac4mac Posted on Wednesday, October 28, 2009 - 10:20 am:        Lift the rider seat and you can see the rear valve cover. Plug-over coil is in the center. Clip the dyno lead around the whole wire bundle on the coil(2 or 3 wires, I forget). Zack

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: