G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Betzy Posted on Wednesday, September 30, 2009 - 02:07 pm:        Anyone have picture from service manual for this, it looks like just mirrors and 4 bolts? Headlights do not need to be removed right?? thks   Daggar Posted on Wednesday, September 30, 2009 - 02:28 pm:        Two lower bolts and the mirrors. Super easy.   Geforce Posted on Wednesday, September 30, 2009 - 03:41 pm:        It's so easy a caveman can do it. The only caution I would give you is to be careful with the turn signal wires. It is easy to get them a little nicked up *They are covered well from the factory with the provided rubber heat shrink or loom they use* Just take them off one at a time and lift the plastic *enough to create a small space* from the upper fairing bracket and ease them out. Good luck!   Xb9er Posted on Wednesday, September 30, 2009 - 04:12 pm:        okay, Im hairy I get it. GOSH!!   Carbonbigfoot Posted on Wednesday, September 30, 2009 - 07:19 pm:        Ha! I'm turning into a Wookie as I get closer to 40.... R   Betzy Posted on Wednesday, September 30, 2009 - 08:26 pm:        Daggar, Geforce thankyou very much, Xb9r....what the.....leave my thread alone please!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: