Author |
Message |
Andros
| Posted on Monday, June 22, 2009 - 03:19 am: |
|
Did anyone manage to get rid of the jerkyness in the 0-3500 rpm zone on the CR. If so how did you get about it? I have the latest reflash 12z |
Thedavyboy
| Posted on Monday, June 22, 2009 - 09:09 am: |
|
I have not felt any choppiness on my cr . Although I do know that gear selection is key on this bike at certain rpm's .. |
Xl1200r
| Posted on Monday, June 22, 2009 - 09:31 am: |
|
It's not gone completely, but the 12Z flash helped immensly. |
1_mike
| Posted on Monday, June 22, 2009 - 10:52 am: |
|
Yep...that dreaded program that can be purchased from the guy in Ohio...works great. Needs a little tweaking but that's what the program is designed to do. My CR now pulls hard, smooth from 2000rpm (maybe 2200rpm!) all the way up to redline. Mike |
Carbonbigfoot
| Posted on Monday, June 22, 2009 - 11:15 am: |
|
I'm fixin to pull the trigger on that.... <grin> R |
Bcrawf68
| Posted on Monday, June 22, 2009 - 03:47 pm: |
|
Down here in Tejas, it's already getting hot. So, I changed the cold weather enrichment table to a hot weather enrichment table. That is, I'll never ride the bike at -22 and will ride when it gets hot (summertime). I set the points to add more fuel as the engine heats above normal. I sat in an easy tag lane for 10 minutes the other day with AT: 113. CT never went above 211 and cooled off within a block of moving again. |
|