Author |
Message |
Scubarc51
| Posted on Saturday, April 25, 2009 - 02:44 pm: |
|
i have a 1125cr and am looking for where the cable plugs in to use ECMspy |
Fresnobuell
| Posted on Saturday, April 25, 2009 - 02:53 pm: |
|
right above the oil cooler there is a plug tucked away |
Scubarc51
| Posted on Saturday, April 25, 2009 - 03:02 pm: |
|
found it thanks |
Fresnobuell
| Posted on Saturday, April 25, 2009 - 03:25 pm: |
|
good luck and happy programming! |
Palmer
| Posted on Saturday, April 25, 2009 - 03:29 pm: |
|
and where is the 12v accessory plug on the CR? |
Fresnobuell
| Posted on Saturday, April 25, 2009 - 03:39 pm: |
|
not as sure on this one but I believe it runs behind the speedo somewhere (you probably already knew that thought.) I never had the desire to add any accessories, so it didn't read alot of the threads about the acc. plug. you know how much attention one usually pays when something doesn't apply to him/her. However, I am SURE more accurate responses will be forthcoming. |
Palmer
| Posted on Saturday, April 25, 2009 - 04:01 pm: |
|
As far as I know the 12v accessory plug on the R is under the triple clamp somewhere: http://www.badweatherbikers.com/buell/messages/290 431/388582.html?1219363351 but on the CR? I couldn't find it. Oh, ok, I did not search it too much, but I couldn't find him. But i thinks It has to be there because of the heated grips accessory. I would like to have cigar lighter jack to recharge my GPS, cause this summer i'll be in Cannes in France, in order to have loooong rides on mountains. But I need to return in Cannes every evening. I don't want problems! |
Fresnobuell
| Posted on Saturday, April 25, 2009 - 05:02 pm: |
|
Palmer you are probably correct. I had to pull my instrument cluster and thought I saw the acc. plug. Sorry about the bad info. |
Voodoo
| Posted on Sunday, April 26, 2009 - 09:34 am: |
|
Palmer, take the windscreen off. It is right behind the screen. Grey/tannish I think with some orange in there.....maybe. It has a cover on it that looks like a connector with no wires coming out the other side. 2 pin connector. It only has power when the engine is running. Camera is dead, sorry no pics. |
Palmer
| Posted on Sunday, April 26, 2009 - 10:02 am: |
|
oh ok, thanks Voodoo! like this one? so can I build a 12v connector with the "cover with no wires" from this if I follow the instructions on this topic? http://www.badweatherbikers.com/buell/messages/290 431/388582.html?1219363351 |
Pizzaboy
| Posted on Sunday, April 26, 2009 - 03:00 pm: |
|
umm did i miss something during winter hibernation??? i thought ecmspy was a no go for the 2008 MY and up bikes??? |
Voodoo
| Posted on Sunday, April 26, 2009 - 05:34 pm: |
|
^ thats it. |