Author |
Message |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 01:01 am: |
|
Well my buddy goes to MMI(motorcycle mechanics institute) and he's in his dyno class now and....I get FREE dyno runs 5 days a week...usually, and i got my first dyno run now and when xb9's performance calibration comes out then i will get an after...btw the tech said the dyno is about 5hp down from actual. so im actually somewhere around 133 The bike is bone stock, with noid connected, airbox top on, and afv's are 100/100, and all flashes and updates. Jake (Message edited by ridenusa4l on March 19, 2009) (Message edited by ridenusa4l on March 19, 2009) |
D_adams
| Posted on Thursday, March 19, 2009 - 01:09 am: |
|
Nice numbers for bone stock! Wish they would have had this when I went to school there 20 years ago. They had the dyno, but didn't do printouts or allow us to run our bikes on them then. As I recall, they didn't have the water cooling hooked up, so they were limiting runs to a max of 25 hp and the little YSR-50's we built/tuned never made more than 19 or 20 hp. |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 01:20 am: |
|
wow that sucks dean, i had to bring a thumb drive to get the print out, i was kinda hoping for a little more but that will come in time.. It was really funny, i took a wrong turn and drove past the H-D/Buell classes, where there were about 15 firebolts outside and they have no 1125's, they all gocked in amazement when i drove buy and pointed lol IT WAS AWESOME.. Jake |
D_adams
| Posted on Thursday, March 19, 2009 - 01:36 am: |
|
Do they still have drag races out in front of the school at nite? I saw a lot of wheelies and a few crashes there after classes let out. I assume the school is still one block off of OBT on that side road? |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 01:46 am: |
|
Yeah my buddy saw a kid on a brand new gixxer 1000 tryin to show off and high sided and crushed one of his mufflers lol, but yeah people always tryin to show off. Its on deer valley rd, in Phoenix..if thats wat u mean.. Jake (Message edited by ridenusa4l on March 19, 2009) |
D_adams
| Posted on Thursday, March 19, 2009 - 02:17 am: |
|
Ahhhh, I went to the one in Orlando FL. Never made it out there to AZ. |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 02:23 am: |
|
oh ok,that makes sense oh well same environment lol, i was really hyped up about my run until i asked how much a STOCK gixxer 1000 makes AT THE WHEEL...175 horspower and about 80 ft./lbs. of torque!!!!!!!!1 Jake |
Pariah
| Posted on Thursday, March 19, 2009 - 02:39 am: |
|
Jake, Thanks for posting... do you have any of the reflashes done, or is your ECM mapping "completely original"? Thanks, Takis |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 02:42 am: |
|
i have all flashes and updates done, and will be getting xb9's program VERY soon.. Jake |
Spectrum
| Posted on Thursday, March 19, 2009 - 08:09 am: |
|
What no power lose with the 3rd flash. I'm disappointed! |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 11:52 am: |
|
no after the 3rd flash it felt stronger than ever lol Jake |
Pariah
| Posted on Thursday, March 19, 2009 - 12:13 pm: |
|
That's great news... well, I guess I won't be holding out any longer... Thanks! |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 12:16 pm: |
|
Dont hold back it makes it pull ALOT harder from the bottom end and accelerates wuicker on the top from what ive felt, and ALOT better gas mileage!! Jake |
Ccryder
| Posted on Thursday, March 19, 2009 - 12:25 pm: |
|
Bryan: Get real, power loss after 3rd flash. I bet if you went to Snopes it would show up as an "Urban Legend"!!! |
P_squared
| Posted on Thursday, March 19, 2009 - 12:37 pm: |
|
"But I read it on the interweb thingy so it MUST be true." Paging Fresno Paging Fresno Please see a post of a 3rd flash ecm w/ HP over 120 and an owner testimony of the bike being stronger. No animals were hurt in the making of this post. This post is intended for mature audiences and is provided as humor only with no intent to actually make anyone feel less than happy with their Buell. BadWeb is not responsible for the contents of this post. If you've read all of this, it must still be cold where you are at, so I will go ride for you today.}} |
Fresnobuell
| Posted on Thursday, March 19, 2009 - 01:50 pm: |
|
Great. I'll put a tick mark in the "greater than 120HP" column. +1 |
Carbonbigfoot
| Posted on Thursday, March 19, 2009 - 11:54 pm: |
|
Different dynos, blablabla. Oh BTW, I'm Back! Great #'s, btw. R (Message edited by Carbonbigfoot on March 19, 2009) |
Ridenusa4l
| Posted on Thursday, March 19, 2009 - 11:57 pm: |
|
Thanx Jake |
Kttemplar
| Posted on Friday, March 20, 2009 - 12:19 am: |
|
I got similar numbers a few months ago at Liberty HD/Buell 128.92HP & 73.57 ftlbs My bike is stock with all of the reflashes as well. Mike |
Ds_tiger
| Posted on Friday, March 20, 2009 - 06:12 pm: |
|
Whats all this hot flash business???
|
Ds_tiger
| Posted on Friday, March 20, 2009 - 06:12 pm: |
|
OK- I'll stop! |
Carbonbigfoot
| Posted on Friday, March 20, 2009 - 06:47 pm: |
|
Naw, man. Your pics are good for those of us that are visual learners.... R |
|