| Author | Message | ||
     Usmoto |
I had previously posted that I would like your non working 1125r rear turn signals. I'd like to do some experimenting and I need more materials to work with. If you would like to donate your turn sigs to the cause let me know. Won't cost a thing except a very little amount of time. If you're interested, I will mail you a prepaid envelope. All you have to do is drop the parts in and mail it back. All I need is the circuit boards that are in the rear turn signals. They are fairly easy to get out. If you can, please snip off the two terminals on the back of the boards. I don't need them and it'll make the envelope flatter. There are pics of the circuit boards in a thread by Rah7777777: (1125R Superbike Board » Archive through October 01, 2008 » An inside look in the broken turn signals....) Thanks in advance for helping. | ||
| Bikejunky |
So if it's not top secret and you don't mind me asking, whatcha workin on with all these turnsignals? | ||
| Usmoto |
 Top Secret, that's a good one. My sigs stopped working a couple months ago. Being an electronics tech I decided to take them apart to see if I could find out what's really wrong with 'em and fix 'em. Didn't find anything jumping out at me so I decided to redo the whole circuit inside. I'm going to build a couple sets of the signals and test 'em. I'm pretty sure I have a formula that works but I want to test a couple sets to be sure. Let the smoke session commence. Once that's done, I'll offer the info to our Badwebbers in case they want to fix theirs. I'm only modifying the circuit board inside the turn signal. I could make them from scratch but it's a lot easier to just modify the existing boards.  Rock On Buell! |
