| Author | Message | ||
     Parrick |
I like my clutch lever a good bit lower than the stock angle. I was lowering it yesterday and the hydraulic line didn't have much slack in it to work with. I noticed the clamp that holds the line to the front fork routes the line to the outside and around the screw that holds the clamp. I flipped and reversed the clamp and it made a big difference. Now my Pit Bull front stand fit in there much easier without pinching the clutch line too. Even at the stock lever angle that hydraulic line seemed to have a lot of tension on it. I wonder if the clamp was mounted backwards at the factory? |
