Author |
Message |
Duggram
| Posted on Saturday, September 27, 2008 - 11:22 am: |
|
Why would you want one over the other? |
Pridayr
| Posted on Saturday, September 27, 2008 - 11:33 am: |
|
Will ECMSpy work with the 1125? I didn't know that was an option. |
Duggram
| Posted on Saturday, September 27, 2008 - 12:02 pm: |
|
Pridayr, please explain |
Pridayr
| Posted on Saturday, September 27, 2008 - 12:18 pm: |
|
I guess the question is this: is the EFI system on the 1125 the same as on the XB's? I don't see any reference to it being used on 1125's on the site. If so, that's great, because the ECMSpy is free, and the Buell race ECU is not even available unless you have a race license, and therefore may as well be made out of dilithium crystals and transparent aluminum. (sorry, my Inner Geek was showing there for a minute...) Rob |
Krassh
| Posted on Saturday, September 27, 2008 - 12:34 pm: |
|
Well since the 1125R is not supported by ECMspy and developed has ceased on it. The Race ECM it the only option until someone comes out with a product. (Message edited by krassh on September 27, 2008) |
Pridayr
| Posted on Saturday, September 27, 2008 - 12:42 pm: |
|
That's what I thought... Shame tho. R |
Redbuelljunkie
| Posted on Saturday, September 27, 2008 - 04:06 pm: |
|
I would guess that DDFI-3 was developed for the 1125 models, and then applied to the XB line for production/maintenance simplicity. Either way, it's the same system for both model lines. |
Pridayr
| Posted on Saturday, September 27, 2008 - 05:37 pm: |
|
I didn't know that they started using the DDFI-3 on the XB's. That start in 08? R |
Boltrider
| Posted on Saturday, September 27, 2008 - 06:58 pm: |
|
I didn't know that they started using the DDFI-3 on the XB's. That start in 08? Yes. |
Xbswede
| Posted on Saturday, September 27, 2008 - 10:52 pm: |
|
Is the DDFI-3 that is on the early 08 XB'a the same as on the 08 1125R? Because ECM Spy does work with the 08 XB. At leas t the one I tired it on. |
Easyrider
| Posted on Sunday, September 28, 2008 - 02:07 am: |
|
DDFI-3 started on the XBRR.. All the 08 models with build date on the frame 07 are programmable with ECMSPy, the later models ECM 08 build date on the frame are not. the ECM is protected and not in the ECMSPY data. DDFI-3 is ONLY on the 1125 models and is NOT working with ECMSPY Techno research say the have a solution for the 1125 i did'nt try it yet and they have a working solution for the later 08 models XB |
Krassh
| Posted on Sunday, September 28, 2008 - 02:46 am: |
|
DDFI-3 is ONLY on the 1125 models I guess Buell.com is a misprint on the XB models that now use DDFI-III. |
Easyrider
| Posted on Sunday, September 28, 2008 - 04:00 am: |
|
Good one, krassh, was early first coffee,. the DDFI-III for the 1125 and the later models 08 do not work with ecmspy |
|