| Author | Message | ||
     Ajshoots |
My 1125 is my first Buell and have been reading everyones posts about their AFV values front and rear. I was wondering how you can check your values. Can it be accessed though the instrument cluster? I have had about every problem possible with this bike and now my dealership is no longer a Buell dealer. Going to have to travel for services and such now. Have had the reflash and the bike ran great for about 200 miles started stalling and running ruff. After about 100 miles of that it is back to running very well. Any help on viewing the values would be much appreciated! | ||
| Zac4mac |
Go into Diagnostics Mode. To do that, press both the Mode and Toggle and turn the key to "run" or "Park". The display will say DIAG MODE if you do it right, BUELL etc if not. Once you see DIAG MODE, press the Mode button to advance thru the displays. When you access DM in the "run" position, you can start the bike and see live data while running. As soon as you put it in gear and start moving, it drops out of DM tho. | ||
| Vincent |
So many times I have wanted to ride the bike in DIAG mode, gonna have top throw that on the table for the next reflash. The roughness could be the bike re-learning the values. Congrats on the first Buell, sorry about the luck tho. |
