| Author | Message | ||
     Bobup |
I had trouble with my local dealer parts guy.....and still need pins for the accessory plug. male and female pins needed from a sponsoring dealership. PM me and we will do business, thank you very much bob | ||
| Josh_ |
Good luck. If you find any let me know. Best advice so far (Reepcheep I think) was to tin the ends of the wires you want connected, remove the rubber plugs from the end of the "blank" and insert the tinned ends. | ||
| Jdugger |
You can buy loudspeaker type tab pins from Radio Shack and take off the insulation and that will stick in there just fine. Just solder in your leads. | ||
| Zac4mac |
I think I have the page here... http://swsct.sws.co.jp/housing_e.asp?number_s=6189 0100tss&page_no=0 Both housings and pins. Have no idea where/how to order. Looks like a bunch of "affiliates" in Texas. | ||
| Bobup |
thanks Zac that will get me going bob | ||
| Jackbequick |
Bobup, Is that a Deutsch connector? If it is, they can be found on eBay and here is a place that quick and reliable on both stock and shipping: http://www.deutschconnector.com/ Jack | ||
| Zac4mac |
Not Deutsch - Sumitomo | ||
| Jdugger |
Accessory Plugs: There's one in the dash, but is there also one in the tail section? | ||
| Ccryder |
I have only heard/ seen the one up front. It is controlled by the CAN bus so when the battery voltage drops too low, the accy plug is shut down. This keeps you running, hopefully. | ||
| Two_buells |
it is this one? DT04-2P-Assy http://www.deutschconnector.com/products/deutsch_d t_2-way_connectors.html | ||
| Zac4mac |
No, it's a Sumitomo, only under the fairing, not in tail. See link above |
