G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dtx Posted on Friday, March 14, 2008 - 09:21 pm:        I figured out a way to make a little more room to use the Pit Bull Rear stand on the 1125R. As you may know, it works OK as is...but is a little too tight. First, I took the washer on each side of the width adjustment off. They appeared to be limiting the maximum width of the stand. I then filed down the edge of the washer about 1/4". After reinstalling the washer this made the bearing pads just a little bit wider. Then, I put my foot on one side of the stand and pulled the opposite direction on the other. These stands are super strong, but I managed to bend the stand ever so slightly. This bought me all the extra room I needed and now my Pit Bull Rear stand fits my 1125R much better.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: