| Author | Message | ||
     Luke_m |
Hi, I am looking for S3T handlebars. Specifically the ones with the larger spacing at the clamp over the Blast bars. Part number N0002.E I am located in IL, 60004. Thank you! | ||
| 96s2t |
I would give you my black ones but it cost about $100 for shipping.  | ||
| 96s2t |
Or if you are ever in Vancouver BC Canada you can stop by my place a I will give them to you. | ||
| Jamie04 |
Luke, For whatever its worth, if you cannot find the specific wider bars you are seeking, I used a set of Blast handlebars on my '02 Cyclone after cutting them in the middle and welding in a 1 inch section of tubing to widen them. Once the welded area was painted and hidden behind the dash, it was not noticeable. The uprights then cleared the dash with no interference and the slight extra width was closer to that of the stock cyclone bars. I've since put 20k miles on those modified handlebars. |
