| Author | Message | ||
     651lance |
Set of front and rear bike display bike stands. These were mainly use during the IMS shows and on some dealership show floors to display the bikes in the upright position looking like they are carrying the front wheel. Front stand made from 1/4” steel with the Buell logo cut into both sides. Made to have the front wheel of tub frames models sit on top of when used with the rear stands. The rear stand pins go into the rear axle balancing the bike in the upright position with the rear tire in contact with the ground. The power coating is in good shape on the front stand and fair shape for the rear stands. They rear as some scraps in the paper coat. These are rare to fine for sale. Local pick up only due to the weight. $550 for the set. Thanks, Lance     (Message edited by 651lance on November 02, 2019) | ||
| Screamer |
Pm sent | ||
| 1313 |
PM sent. | ||
| 651lance |
Screamer- I didn’t get your PM. Email at questionformybuell@gmail.com. | ||
| Doninrenogmailcom |
I REALLY appreciate the pics...looks like I could very easily weld up/make a set of those, though getting the logo cut in either laser or water jet might be a bit of a trick. On second thought, it might be nice to get WHAT I WANT cut in there instead of the Buell logo.icon, though that is pretty cool, too! | ||
| K12pilot |
I made my own rear stands. easy peasy. but the front is interesting ))) | ||
| 1313 |
You know what was running through my mind as I was typing my PM? "Please, don't let Screamer snipe me! Don't let Screamer snipe me! Please, don't let Screamer snipe me!" And after I hit the Post this Message button on BadWeB, what did I see: Screamer sniped me! | ||
| Screamer |
Brankin, I reluctantly passed - contact Lance. |
